 |
SIP7102V
SINREY
SIP7102V is a network broadcasting terminal supporting SIP protocol with 10/100M Ethernet interface, which receives audio data from the network and can be directly connected to two 15W speakers through the device's DSP and amplification circuit.
Features
l Standard RJ45 network interface;
l ARM+DSP-based architecture with high-speed industrial-grade chips, with a start-up time of ≤ 1 second;
l Support SIP v1 (RFC2543), v2 (RFC3261) and other network protocols
l Supports audio decoding protocols such as wideband G.722, narrowband G.711a/u and MP3
l Support RTP multicast playback protocol, support 10 priority levels, high priority audio can interrupt the low priority
l Support our private broadcast protocol, which can be broadcast shouting, timed ringing and other operations through our broadcast software
l 2 * 15W audio amplifier output, can be connected to 8 Ohm fixed resistance speakers.
l Has a volume knob to adjust the playback volume.
l With one audio line input for local amplification
l With an audio line output, you can play with an external amplifier or active speakers
l Provide PC-based IP and other parameters configuration procedures
l Support firmware remote upgrade
parameters
l Network interface: 10/100Base-TX adaptive network, RJ45 interface, send and receive data instructions
l Network protocols: Support SIP v1 (RFC2543), v2 (RFC3261), TCP, UDP, ARP, ICMP, DHCP, DNS, IGMP, etc.
l Line output: external active speaker or amplifier, typical amplitude 2200mVpp
l Broadcast output: support for 2-way 15W amplifier output, can be connected to 8 Europe constant resistance speakers
l Line input: can be used as local amplification, typical amplitude 2000mVpp
l Input voltage: DC 12~24V
l Power consumption: static <300mW
l Operating temperature: -40℃～85℃
l Specification size: 130×85×30mm
l Panel: Aluminum alloy housing
l Weight: 0.2kg
l Installation: wall-mounted external installation
Installation & Configuration
SIP7102V is wall-mounted. With RJ45 network connector and DC5.5-2.1 power connector. Upon power-up, the SIP7102V will automatically obtain an IP address (BootP or DHCP) or find its IP address using Manager software. This terminal can also be easily configured and controlled through a standard web browser.
Downloads
SIP7102V Network Playback Decoder.pdf
SIP7102V is a network broadcasting terminal supporting SIP protocol with 10/100M Ethernet interface, which receives audio data from the network and can be directly connected to two 15W speakers through the device's DSP and amplification circuit.
Features
l Standard RJ45 network interface;
l ARM+DSP-based architecture with high-speed industrial-grade chips, with a start-up time of ≤ 1 second;
l Support SIP v1 (RFC2543), v2 (RFC3261) and other network protocols
l Supports audio decoding protocols such as wideband G.722, narrowband G.711a/u and MP3
l Support RTP multicast playback protocol, support 10 priority levels, high priority audio can interrupt the low priority
l Support our private broadcast protocol, which can be broadcast shouting, timed ringing and other operations through our broadcast software
l 2 * 15W audio amplifier output, can be connected to 8 Ohm fixed resistance speakers.
l Has a volume knob to adjust the playback volume.
l With one audio line input for local amplification
l With an audio line output, you can play with an external amplifier or active speakers
l Provide PC-based IP and other parameters configuration procedures
l Support firmware remote upgrade
parameters
l Network interface: 10/100Base-TX adaptive network, RJ45 interface, send and receive data instructions
l Network protocols: Support SIP v1 (RFC2543), v2 (RFC3261), TCP, UDP, ARP, ICMP, DHCP, DNS, IGMP, etc.
l Line output: external active speaker or amplifier, typical amplitude 2200mVpp
l Broadcast output: support for 2-way 15W amplifier output, can be connected to 8 Europe constant resistance speakers
l Line input: can be used as local amplification, typical amplitude 2000mVpp
l Input voltage: DC 12~24V
l Power consumption: static <300mW
l Operating temperature: -40℃～85℃
l Specification size: 130×85×30mm
l Panel: Aluminum alloy housing
l Weight: 0.2kg
l Installation: wall-mounted external installation
Installation & Configuration
SIP7102V is wall-mounted. With RJ45 network connector and DC5.5-2.1 power connector. Upon power-up, the SIP7102V will automatically obtain an IP address (BootP or DHCP) or find its IP address using Manager software. This terminal can also be easily configured and controlled through a standard web browser.
Downloads
SIP7102V Network Playback Decoder.pdf
