 |
SIP711V
SINREY
SIP711V is a wall-mounted intercom terminal with 10/100M Ethernet interface, supporting G.711 audio decoding, which receives audio data from SIP network and decodes and plays in real time. Configured with one line input, one line output, which can output internal audio source to external amplifier, and Mic input, one relay output and one call terminal CALL input, it supports SIP intercom, playback and other functions.
As an intercom terminal, SIP711V supports full-duplex two-way intercom with good echo suppression, SIP supports standard SIP protocol and can be used with standard SIP system.
Installation & Configuration
SIP711V is wall-mounted. With RJ45 network interface and DC5.5-2.1 power interface, it also supports the addition of POE function. After power on, SIP711V will automatically get an IP address (BootP or DHCP), or find its IP address using Manager software. This terminal can also be easily configured and controlled through a standard web browser.
Application Development & Integration
SIP711V supports various control and communication modes, and we provide development documentation and programming examples for playback as well as SIP intercom (off SIP server). Serial port control commands and network control commands are also available. Software developers can write their own audio applications with custom features.
Parameters
Network protocol: support TCP, UDP, RTP, ARP, ICMP, DHCP, DNS, IGMP, etc.
Key input: Call interface, short connection can realize the function of initiating intercom, initiating multicast and answering intercom.
MIC input: self-contained high-performance microphone, frequency range 70 to 12.K5Hz;
Line In: Line In interface can be used as a monitor or intercom, typical amplitude 2000mVpp
Line Out: Line Out interface external active speaker or amplifier, typical amplitude 2200mVpp
Relay output: when the device intercom or play, speaker interface relay output closed switch quantity.
MIC In: external passive microphone input, typical amplitude 50mVpp, signal-to-noise ratio 68dB
Intercom mode: support quiet mode and noisy mode, key answer and automatic answer, on-site hang-up and remote hang-up and other modes
Input voltage: DC 9~24V
Power consumption: static <300mW
Operating temperature: -40℃～85℃
Specification size: 130×85×30mm
Panel: Aluminum alloy shell
Installation: Wall-mounted
Weight: 0.2kg
Downloads
SIP711V SIP intercom help terminal.pdf
SIP711V is a wall-mounted intercom terminal with 10/100M Ethernet interface, supporting G.711 audio decoding, which receives audio data from SIP network and decodes and plays in real time. Configured with one line input, one line output, which can output internal audio source to external amplifier, and Mic input, one relay output and one call terminal CALL input, it supports SIP intercom, playback and other functions.
As an intercom terminal, SIP711V supports full-duplex two-way intercom with good echo suppression, SIP supports standard SIP protocol and can be used with standard SIP system.
Installation & Configuration
SIP711V is wall-mounted. With RJ45 network interface and DC5.5-2.1 power interface, it also supports the addition of POE function. After power on, SIP711V will automatically get an IP address (BootP or DHCP), or find its IP address using Manager software. This terminal can also be easily configured and controlled through a standard web browser.
Application Development & Integration
SIP711V supports various control and communication modes, and we provide development documentation and programming examples for playback as well as SIP intercom (off SIP server). Serial port control commands and network control commands are also available. Software developers can write their own audio applications with custom features.
Parameters
Network protocol: support TCP, UDP, RTP, ARP, ICMP, DHCP, DNS, IGMP, etc.
Key input: Call interface, short connection can realize the function of initiating intercom, initiating multicast and answering intercom.
MIC input: self-contained high-performance microphone, frequency range 70 to 12.K5Hz;
Line In: Line In interface can be used as a monitor or intercom, typical amplitude 2000mVpp
Line Out: Line Out interface external active speaker or amplifier, typical amplitude 2200mVpp
Relay output: when the device intercom or play, speaker interface relay output closed switch quantity.
MIC In: external passive microphone input, typical amplitude 50mVpp, signal-to-noise ratio 68dB
Intercom mode: support quiet mode and noisy mode, key answer and automatic answer, on-site hang-up and remote hang-up and other modes
Input voltage: DC 9~24V
Power consumption: static <300mW
Operating temperature: -40℃～85℃
Specification size: 130×85×30mm
Panel: Aluminum alloy shell
Installation: Wall-mounted
Weight: 0.2kg
Downloads
SIP711V SIP intercom help terminal.pdf
