 |
SIP2403V
SINREY
The SIP2403V Network Audio Module is a general purpose standalone SIP audio function module that can be easily embedded into OEM products. The module can encode and decode SIP protocol and RTP audio streams from the network. It also supports various network protocols and audio codecs for applications such as VoIP and IP paging as well as high quality music streaming.
• Encode: Support G.711a/u, G.722 and RTP multicast mode.
• Audio input (M-ST), output status (P-ST): You can connect indicator lights or control relays.
• With 2*15W power amplifier output, it can also be changed to 1*30W power amplifier output by adjusting the circuit
• With 1 channel local audio input to realize the local sound amplification output function
• POE power supply:Provide POE power receiving module interface
• General I/O: Control extended circuits or devices
• Universal serial port: Control extended circuits or devices
• Real Time Clock: The module is powered off, or the time is not adjusted by the server to provide accurate time, which can be obtained through the serial port or network, or the audio file can be played regularly.
•Decode: That is, audio playback. Receive the audio stream from the network, and output high-quality audio signal through the line after decoding by the module. Currently supports the following audio formats:MP3.WAV (PCM +IMA ADPCM), G.711, G.722, etc. Can play audio streams up to 48khz sampling rate 320kps bit rate. Receive the audio stream sent by TCP, UDP, RTP, multicast, broadcast, etc. in the network, and play it after local decoding
• Power input: voltage DC 12～24V
• Temperature: Operating temperature range Industrial grade: -40~85℃
• Network interface: 10/100M Base adaptive Ethernet interface
• Mic/LineIn : typical amplitude 1000mVrms, signal-to-noise ratio 95dB
• Line Out: load 10KΩ, typical 1000Vrms, signal-to-noise ratio 95dB (in playback mode)
• RL-Line: local amplification input, typical amplitude 1000mVrms, signal-to-noise ratio 95dB
• Power output: power amplifier output, output power 2*15W or 1*30W
• Decoding mode: Provide stereo playback, up to 48kHz, 320kbps audio stream, support MP3, WAV (PCM +IMA ADPCM), G.711 a/u, G.722 and other formats. The minimum delay is 50ms
• Encoding mode: Support G.711a/u, G.722 and RTP mode
• Two-way mode: two-way talkback, with high-performance echo suppression algorithm, G.711a/u, G.722 encoding
• Control serial interface: baud rate 115.2kbps
• GPIO: A total of 4 general-purpose IOs, of which 2 inputs and 2 outputs
• Universal serial port: support transparent transmission, baud rate 2400～115.2kbps, 7,8 data bits, 1, 2 stop bits, None, Even, Odd, Space, Mark check
• Module size: length×width×height: 5.7×5.7×1.7cm
The SIP2403V Network Audio Module is a general purpose standalone SIP audio function module that can be easily embedded into OEM products. The module can encode and decode SIP protocol and RTP audio streams from the network. It also supports various network protocols and audio codecs for applications such as VoIP and IP paging as well as high quality music streaming.
• Encode: Support G.711a/u, G.722 and RTP multicast mode.
• Audio input (M-ST), output status (P-ST): You can connect indicator lights or control relays.
• With 2*15W power amplifier output, it can also be changed to 1*30W power amplifier output by adjusting the circuit
• With 1 channel local audio input to realize the local sound amplification output function
• POE power supply:Provide POE power receiving module interface
• General I/O: Control extended circuits or devices
• Universal serial port: Control extended circuits or devices
• Real Time Clock: The module is powered off, or the time is not adjusted by the server to provide accurate time, which can be obtained through the serial port or network, or the audio file can be played regularly.
•Decode: That is, audio playback. Receive the audio stream from the network, and output high-quality audio signal through the line after decoding by the module. Currently supports the following audio formats:MP3.WAV (PCM +IMA ADPCM), G.711, G.722, etc. Can play audio streams up to 48khz sampling rate 320kps bit rate. Receive the audio stream sent by TCP, UDP, RTP, multicast, broadcast, etc. in the network, and play it after local decoding
• Power input: voltage DC 12～24V
• Temperature: Operating temperature range Industrial grade: -40~85℃
• Network interface: 10/100M Base adaptive Ethernet interface
• Mic/LineIn : typical amplitude 1000mVrms, signal-to-noise ratio 95dB
• Line Out: load 10KΩ, typical 1000Vrms, signal-to-noise ratio 95dB (in playback mode)
• RL-Line: local amplification input, typical amplitude 1000mVrms, signal-to-noise ratio 95dB
• Power output: power amplifier output, output power 2*15W or 1*30W
• Decoding mode: Provide stereo playback, up to 48kHz, 320kbps audio stream, support MP3, WAV (PCM +IMA ADPCM), G.711 a/u, G.722 and other formats. The minimum delay is 50ms
• Encoding mode: Support G.711a/u, G.722 and RTP mode
• Two-way mode: two-way talkback, with high-performance echo suppression algorithm, G.711a/u, G.722 encoding
• Control serial interface: baud rate 115.2kbps
• GPIO: A total of 4 general-purpose IOs, of which 2 inputs and 2 outputs
• Universal serial port: support transparent transmission, baud rate 2400～115.2kbps, 7,8 data bits, 1, 2 stop bits, None, Even, Odd, Space, Mark check
• Module size: length×width×height: 5.7×5.7×1.7cm
